Jeep 2.0L Turbo GME Engine: Specs, Problems, Reliability, & More

Jeep 2.0L Turbo GME Engine: Specs, Problems, Reliability, & More. The 2.0 L GME T4 Hurricane turbo engine is a 2.0-liter inline four-cylinder turbocharged gasoline engine with direct fuel injection. This engine is part of the Global Medium Engine (GME) architecture family created by the powertrain division of Fiat Chrysler Automobiles (short for FCA) group. The American version, made by FCA US division, was introduced first in 2018 Jeep Wrangler and a year later became available for the Jeep Cherokee.

Jeep 2.0L Turbo GME Engine Specs, Problems, Reliability, & More

This new engine has a low-pressure, sand-cast aluminum cylinder block with cast-iron liners. The engine block is an open deck design and different from European engines with a closed deck used in Alfa Romeo’s vehicles. The 2.0 L GME engine has a lightweight crankshaft which seats with an offset from cylinder bores. The crankshaft offset reduces cylinder wall side loading since the connecting rod is more vertical during the power stroke.

Jeep 2.0L Turbo GME Engine Specs, Problems, Reliability, & More
image cr: motorreviewer

The engine block also equipped with a low-friction roller bearing balance shaft and a variable displacement two-stage oil pump. Two-stage oil pump provides high-pressure mode only under high-load engine operation, and low-pressure oil during typical driving conditions. It also provides oil for the piston cooling jets (piston oil squirters), fitted with each cylinder bore to control piston temperatures and reduce spark knock. Pistons are cats-aluminum with four valve pockets and plasma-coated piston rings.

On top of the block, there is a cast aluminum alloy cylinder head. The 2.0 Hurricane head features four valves per cylinder, sodium-filled exhaust valves, a central injector, MultiAir valvetrain with dual overhead camshafts (DOHC), high tumble intake ports, and a water-cooled, integrated exhaust manifold. The intake and exhaust camshafts are driven by a low-friction timing chain (an inverted tooth chain) and equipped with dual Variable Valve Timing (VVT) system. The engine uses hollow shafts with polished cam journals to reduce weight (3.5 lbs less) and improve durability.

The 2.0 L GME T4 engine uses direct injection system. The high-pressure fuel pump produces up to 2,900-psi for the high-pressure common-rail injection system. This system injects fuel via multi-hole fuel nozzles inside the cylinders, providing better fuel atomization and allowing for more precise fuel delivery than port injection. The next feature improving both performance and efficiency is a turbocharged intake. There is a twin-scroll, low-inertia turbocharger with an electronically actuated wastegate. It is attached to the cylinder head as the exhaust manifold is integrated into it. An integrated and water-cooled exhaust manifold reduces exhaust temperatures and increases turbocharger reliability as well as accelerates engine warming up. The intake has a built-in, water/air charge intake air cooler. The intake air cooler, throttle body, and turbocharger use a separate cooling circuit. The cooling system also features a variable flow water pump and an electric auxiliary water pump. The exhaust gas recirculation (EGR) system is water-cooled.

Read:  VW/Audi 1.4 TSI/TFSI EA111 Engine Specs, Problems, Reliability

2.0 L GME turbo fours in some applications use a belt-starter-generator (BSG) to help the engine at lower revs. This eTorque system also provides better auto stop/start performance and improves low-end throttle response before the turbo spools up. The engine complies with all modern emission standards thanks to GPEC4 engine-management system with close-coupled catalyst, wide range O2 sensor, and C-EGR system. Because of combination of high compression ratio (10:1) and turbocharging, the turbo hurricane requires minimum unleaded regular, 87 octane (R + M)/ 2; 91 octane or higher recommended for optimum fuel economy and performance. The 2.0 turbo Hurricane is a good alternative to the Chrysler 2.4-liter engine and 3.6 L Pentastar V6.

Jeep 2.0 GME T4 turbo Engine Problems and Reliability

The engine just appeared for sale and it’s hard to say about its long-run reliability. For the most part, owners complain that the engine light has come on after several hundred/thousand miles on a new car. And the reasons for this are quite diverse. It could be a failed sensor, loose hoses or connectors that indicate poor assembly at the factory and subsequent quality assurance. This can be explained by the fact that the engine is new and complex, consists of many parts and takes time to test and resolve upcoming issues.

Read:  Mazda 2.0 SkyActiv-G Engine Specs, Problems, Reliability

Engine Specs

  • Manufacturer: FCA US LLC, Trenton South Engine Plant, Trenton, Michigan
  • Production years: 2016-present
  • Cylinder block material: Aluminum
  • Cylinder head material: Aluminum
  • Fuel type: Gasoline
  • Fuel system: Direct injection
  • Configuration: Inline
  • Number of cylinders: 4
  • Valves per cylinder: 4
  • Valvetrain layout: DOHC
  • Bore, mm: 84.0 mm (3.31 in)
  • Stroke, mm: 90.0 mm (3.54 in)
  • Displacement, cc: 1,995 cc (121.7 cu in)
  • Type of internal combustion: engine Four-stroke, turbocharged
  • Compression Ratio: 10.0:1
  • Power, hp: 270 hp (201 kW)/5,250
  • Torque, lb ft: 295 lb-ft (400 Nm)/3,000
  • Engine weight: –
  • Firing order: 1-3-4-2
  • Engine oil weight: SAE 5W-30
  • Engine oil capacity, liter: 4.7 l (5.0 qt)
  • Oil change interval, mile: 9,000 (15,000 km) / 12 months
  • Applications: Jeep Wrangler (JL), Jeep Cherokee (KL), Jeep Grand Commander