Honda 3.5L J35A/J35Z/J35Y Engine: Specs, Problems, Reliability. The J35 is a 3.5-liter V6 gasoline engine that was initial introduced in the 1998 Honda Odyssey. This new 3.5 L six-cylinder J35A was based upon a 3.2-liter version of the J-series engine family – J32A. In subsequent years, the engine was used on several large and heavy Honda’s sedans, SUVs, pickups, including Acura cars. Throughout the years, the J35 has looked at many updates, and the current J35Y version moved significantly ahead forward compared to its predecessor in terms of fuel productivity, power, and emissions.
The J35A engine remained in production for almost fourteen years (1998-2012). Like the J32A, this engine has a compact aluminum cylinder block with a 60-degree angle between cylinder banks. The deck height is 235 mm. The bore size and pistons stayed the same, but a new forged crankshaft provides a longer 93 mm stroke. This stroked J32 also has 158.5 mm long, lightweight connecting rods. Ahead, there are aluminum cylinder heads with four valves per cylinder and a single overhead camshaft.
Camshafts are driven by a timing belt. The valve train is equipped with Honda’s VTEC system. Valves are pushed by roller rocker arms (there are no hydraulic tappets). The J35A1 features 34 mm intake valves and 29 mm exhaust valves. The J35A1 intake system includes an aluminum 1-stage intake manifold and 55 mm throttle body. This engine also had a 9.4:1 compression ratio.
Honda 3.5L J35A/J35Z/J35Y Engine: Specs, Problems, Reliability
In 2000, the manufacturer introduced a slightly improved version of the J35A1 – the J35A3 engine for the Acura MDX. It features a 10:1 CR, 2-stage intake manifold, a new engine control unite, and setups for the VTEC engagement. This engine was laid in the base of the J35A5, produced from 2002 to 2006. Like the previous engine, this power unit was installed in the MDX. It had a new cylinder block with cast iron sleeves, a new 2-stage intake numerous, an electronic throttle body, a better exhaust system, tuned camshaft. The VTEC engagement was transferred to 4,400 pm.
The next J35A8 engine (2005-2008) for Acura models had a compression ratio of 11:1, oil jets for cooling pistons, and new connecting rods. There are modified heads with 36 mm intake valves, optimized intake ports, and hollow camshafts inside. The J35A8 got a new 2-stage intake manifold activated at 4,000 rpm, fitted with a cold intake.
Honda 3.5L J35A/J35Z/J35Y Engine: Specs
|Manufacturer||Honda Motor Company|
|Cylinder block material||Aluminum|
|Cylinder head material||Aluminum|
|Fuel system||Multi-point fuel injection;
|Number of cylinders||6|
|Valves per cylinder||4|
|Bore, mm||89.0 mm (3.50 in)|
|Stroke, mm||93.0 mm (3.66 in)|
|Displacement, cc||3,471 cc (211.8 cu in)|
|Type of internal combustion engine||Four-stroke, naturally aspirated|
|Power, hp||210-310 hp (157-231 kW)/ 5,400-6,200|
|Torque, lb ft||229-275 lb-ft (310-369 Nm)/ 3,500-5,300|
|Engine weight||550 lbs (250 kg)|
|Engine oil weight||SAE 5W-30, 5W-40 (J35A);
SAE 5W-20, 5W-30 (J35Z) ;
SAE 5W-20 (J35Y)
|Engine oil capacity, liter||4.7 l (5.0 qt) – before 2003;
4.3 l (4.5 qt) – 2003-2013;
5.4 l (5.7 qt) – 2013+
|Oil change interval, mile||6,000 (10,000 km)/12 months|
|Applications||Honda Accord, Honda Odyssey, Honda Pilot, Honda Inspire, Honda Ridgeline, Acura CL, Acura MDX, Acura RL, Acura TL, Acura TLX, Acura TSX, Acura RLX, Saturn Vue|
Honda 3.5L J35A/J35Z/J35Y Engine: Specs, Problems, Reliability
In 2001, the J35A1 underwent a significant upgrade. The new engine, marked as J35A4, has a revised intake system (64 mm throttle valve, a new intake numerous), upgraded exhaust system, and a strengthened VTEC system. The cylinder head was furnished with larger valves; the diameter of the intake valve is 35 mm, of exhaust – 30 mm. The fuel system uses 240 cc injectors. The engine effectiveness also was boosted by a 10:1 compression ratio. In 2005, the J35A4 was already replaced by the J35A6 (an electronic throttle body and new exhaust).
The J35A9 is basically identical to the J35A6 and has some adaptation needed for the Honda Pilot AWD and Honda Ridgeline installations. There is one more version based on J35A6 – it is a J35A7 engine. This 3.5 L V6 engine was equipped with Honda’s Variable Cylinder Management (VCM) – 3-cylinder bypass system, which saves fuel by using the VTEC system to disable one cylinder bank.
The J35Z series was used in 2006-2014 Honda and Acura models. The J35Z1 replaced the J35A9. The J35Z2 with a 10.5:1 compression ratio and Honda’s VCM system was a continuation of the J35A5. In 2008, the J35A8 was terminated and replaced due to the J35Z6. This engine had an 11.2:1 compression, pistons oil jets, a 64 mm throttle body, and a new 2-stage intake manifold actuated after 3,900 rpm. The VTEC system joins the game at 4,750 rpm. The J35Z3 was offered in the Honda Accord Coupe V6 6MT and produced 280 hp with 254 lb-ft (344 Nm) of torque.
The latest J35 series is the current 3.5 L Earth Dreams J35Y engine family. The 1st J35Y1 engine was launched in the 2013 Honda Accord. The J35Y1 features a traditional VTEC on the intake valves plus Honda’s VCM system on the rear (based upon location in the engine bay) cylinder bank under low and moderate load. The cylinder head got a reshaped intake and exhaust ports. VTEC kicks after 5,150 rpm. The new power unit continued to be and replaced the j35z2/j35z3 in creation until 2017.
The J35Y2 differs from Y1 in a 10:1 compression and VTEC without VCM. It also was offered for the Honda Accord, but with a manual gearbox only. Nowadays, Honda uses a series of variations of the J35Y4, which was first launched in 2014 Honda Legend/Acura RLX. This engine is geared up with a direct fuel injection system, high compression ratio (11.5:1), and VTEC with Variable Cylinder Management (AT models).
Honda 3.5 J35 Engine Problems and Reliability
The J35 V6 engine series furnished with a VCM system can unpleasantly surprise owners with an oil leak. This VCM unit is located near an oil dipstick hole and above an alternator. While driving, oil constantly drains through bad VCM gaskets and falls on the alternator causing significant damages to the engine and its electronic systems. The low oil level here leads very quickly to the camshaft cams wear. Fixing that leakage is very easy; just replacing the old gaskets with the new kit.
A lot of Honda engines suffer from rapid camshafts wear. The J35 is not an exception. The reason top is the lack of maintenance. For J35 engines, it is called for to adjust valves after every 30,000 miles. Also, don’t forget to change oil and keep the level high. Keep an eye on the condition of the timing belt. It stands up rarely greater than 50-60k miles. When the timing belt breaks, the pistons will bend the valves.
These are all common problems that could be mentioned about Honda’s 3.5 l V6 engines. In real life, the J35’s life joins 200,000 miles (more than 300,000 km).
Honda 3.5L J35A/J35Z/J35Y Engine Modifications
- J35A1 – 210 hp (157 kW), 229 lb-ft (310 Nm) – Honda Odyssey engine.
- J35A3 – 248 hp (185 kW) at 5,800 rpm, 242 lb-ft (328 Nm) at 4,500 rpm. App: Acura MDX.
- J35A4 – 240 hp (179 kW) at 5,400 rpm, 242 lb-ft (328 Nm) at 4,500 rpm, 10.0:1 compression ratio. Use: Honda Pilot and Honda Odyssey.
- J35A5 – 265 hp (198 kW) at 5,800 rpm, 250 lb-ft (339 Nm) at 3,500 rpm. This is an Acura MDX engine.
- J35A6 – 255 hp (190 kW) at 5,600 rpm, 250 lb-ft (339 Nm) at 4,500 rpm. This is the next engine for the Honda Pilot and Honda Odyssey.
- J35A7 – 244 hp (181 kW) at 5,600 rpm, 241 lb-ft (325 Nm) at 4,500 rpm. It included Variable Cylinder Management. Application: Honda Odyssey, Honda Inspire.
- J35A8 – 286 hp (213 kW) at 6,200 rpm, 256 lb-ft (347 Nm) at 5,000 rpm. Application: Acura RL, Acura TL Type-S. The J35A8 got on the Ward’s 10 Best Engines list for 2005, 2008 and 2009.
J35A9 – 247 hp (184 kW) at 5,750 rpm, 245 lb-ft (332 Nm) at 3,500 rpm. App: Honda Pilot 4WD, Honda Ridgeline.
- J35Z1 – 244 hp (182 kW) at 5,750 rpm, 240 lb-ft (325 Nm) at 4,500 rpm. Application: Honda Pilot 4WD.
- J35Z2 – 268/273 hp (200/204 kW) at 6,200 rpm, 254/251 lb-ft (344/340 Nm) at 5,000 rpm. Function: Honda Accord with AT and Acura RDX.
- J35Z3 – 268 hp (200 kW) at 6,200 rpm, 254 lb-ft (344 Nm) at 5,000 rpm. The engine was offered only for the Honda Accord with 6-speed manual transmission.
- J35Z4 – 250 hp (186 kW) at 5,700 rpm, 253 lb-ft (343 Nm) at 4,800 rpm – Honda Pilot engine.
- J35Z5 – 250 hp (186 kW) at 5,700 rpm, 247 lb-ft (335 Nm) at 4,300 rpm, 10:1 CR. Application: Honda Ridgeline.
- J35Z6 – 280 hp (209 kW) at 6,200 rpm, 254 lb-ft (344 Nm) at 5,000 rpm, 11.2:1 compression. App: Acura TSX V-6, Acura TL.
- J35Z8 – 244 hp (182 kW) at 5,700 rpm, 250 lb-ft (339 Nm) at 4,800 rpm, 10.5:1 CR. Installation: Honda Odyssey.
- J35Y1 – 278 hp (207 kW) at 6,200 rpm, 252 lb-ft (342 Nm) at 4,900 rpm. You can find this engine in the Honda Accord V6 with automatic transmition.
- J35Y2 – 278 hp (207 kW) at 6,200 rpm, 251 lb-ft (340 Nm) at 5,300 rpm. This engine is used in the Honda Accord 6MT V6.
- J35Y4 – 310 hp (231 kW) at 6,500 rpm, 272 lb-ft (369 Nm) at 4,500 rpm. This is a direct injection version with 11.5:1 compression ratio. Application: Acura RLX or Honda Legend.
- J35Y5 – 290 hp (216 kW) at 6,200 rpm, 267 lb-ft (362 Nm) at 4,500 rpm, direct injection. Application: Acura MDX.
- J35Y6 – 280 hp (209 kW) at 6,000 rpm, 262 lb-ft (355 Nm) at 4,700 rpm, direct injection. Application: Honda Pilot, Ridgeline, and Odyssey.